ME quilt block

I know that I have not been on here in some time but I do stay very busy. The newist thing is a class in quilting with the Embroidery Machine. I thought I would add this to my blog for those who would like to see the process.

First of all I went into Illustrator and created a design to digitize in the software that I have for machine embroidery (ME)

After it is digitized and I stitch it this is the first step in making the block. I stitch the complete design in a contrasting color onto muslin so to help me in placing the different pieces.

*** The supplies for this project are as follows:

The first step is to assemble your fabrics and press them.

For each block you will need the following cuts:
1 = Triangle 2.5" (take a 3" square and cut in half for triangle)

2 = 2.5 " by 3.5" strip

3 = Triangle 2.5"

4 = 6.5" by 1.75 " strip

5 = 2.5" by 4.5" Triangle

6 = 8" square of muslin or stabilizer

Set the muslin and stabilizer into your 4" hoop and stitch all the areas on the design for a base for laying up your patches usinga contrasting thread. It should look like below without the
numbers.

Placement of each part is very important. The #1 triangle is positioned just so. Make sure you have a .25" seam then place the #2 into position as in the next photo. Always press the seams to set them then fold the fabric over and press then into position before working the next stitch.

Place #3 the second triangle on the #2 piece and let the machine stitch it into place.

This process is continued throught the block until you get to the last stitching that will put in the inner stitch to hold everything into position. I do not use the contrasting thread after the basic outline.

This is all done in the hoop and designed for a 4" hoop.

Trim the block to .25" outside the box so you can

put the pieces together into a quilt.

Enjoy the fun.

This pes file can be purchased from me for $3.00 at www.victorianbathdelights or by e-mailing me for instructions on how

to get the design.